Monday 17 March 2014

Many times, a gas furnace may stop working altogether. It may not even show any signs for one to decipher what has gone wrong. In this case, there are a few basic steps that owners can take to fine-tune a furnace.


Step One: Inspect the thermostat

Make sure that it is set to heat above the normal room temperature. If the fan is not on, do switch it up.


Step Two: Can the power each the furnace?

Search for burn marks on the control board. Check the breaker and fuse of the furnace in the case that the fan does not work. Look for loose connections and wires. After that, search for a green light on the blower compartment. If the light flashes red, then the difficulty may lie with the furnace control board, thermostat, transformer, the blower motor or the run capacitor. Make sure that the reservoir on the condensate pump is not full.


Step three: Is there a pilot light on the furnace?

If yes, then make sure it is on and the light or the fire is in contact with the thermocouple. If only the pilot is working and the main burner is not, then touch the side of the furnace to make sure it is warm. If it is not, then the control board, thermostat, limit control or the gas valve could be causing the problems.


Step three: The burners.

If the main burners do not come on, make sure that the gas supply pipe to the furnace is not broken. If not, then the gas valve or furnace control may be troublesome. If the burner cannot flame up for more than a few seconds, than the flame sensor may need cleaning.


Final step


If all these steps fail, then it is better to call in professional help for the gas furnace.

Friday 14 March 2014

This boiler is designed with all the user heating needs in the mind of the manufacturer. When this boiler is bought and brought to use, heating cost will be brought down significantly because it is designed to use as less energy as possible. The time when boilers used to consume a lot of energy is long gone because technology has advanced and also people are looking for way of saving money and heating is no exceptional. Due to this regard HWX-195-INT gas fired residential boiler is not left behind in putting some money back to its buyer’s pockets as far as heating cost is concerned.


HW series boilers are designed in different sizes. This is in order to cater for the need of all people. These boilers range from 50,000 to 150,000MBH. All of these boilers come fully fitted with HydroTherms proven hot-surface ignition. People intending to buy new boilers for the cold season should consider the HW series because they are given a limited lifetime warranty.


The HWX-195-INT gas fired residential boiler will guarantee the buyer not only value for their money but also it is guarantying them of their safety, this pretty much nullifies the possibilities of Factory Furnace Outlet Complaints being there. This boiler has a lot of security features like;


Notable Features Carried by the Boiler:
  •        It is fitted with A.S.M.E pressure relief valve that automatically reliefs any pressure build up inside the boiler. This reduces all the chances of the boiler to explode because of high pressures inside the boiler. In regard to safety as well are there no Factory Furnace Outlet Complaints.
  •          The boiler surface is well insulated to the outside to prevent people from getting burnt when they accidentally touch the surface of the boiler. It is very safe to use in homes that have small children.
  • The boiler has temperature pressure gauge, this will help to constantly monitor the temperatures on the boiler. If the temperatures go out of the ordinary the use is able to regulate or switch of the boiler until skilled personnel comes to fix the problem. 

Wednesday 12 March 2014

When it comes to reliability, endurance and energy efficiency the GDS80804BX Gas Furnace from the Factory Furnace Outlet is one of the fines specimens on the market today. One of the main reasons for that is because it comes from the well-known Goodman Brand. It features multiple components that vastly influence the overall efficiency as well as the comfort of the house. The GDS80804BX furnace owes its durability and efficiency to its aluminum steel dual-diameter configuration. Its heavy gauged steel cabinet is the main reason behind its low noise operating levels which are way below the industry’s standards. Moreover, the GDS80804BX Gas Furnace features self-diagnostic that makes troubleshooting and maintenance much easier than with any other model. Also, it’s made from some of the top heat-efficient materials available which largely improve its overall efficiency.

Energy Efficiency is one of the two main key features of Goodman’s GDS80804BX Gas Furnace from the Factory Furnace Outlet. The 80% AFUE rating refers to the fact that eighty cents of every dollar spent on heating are spent to warms the house. For comparison most of the older system comes with 60% AFUE rating. The rest 40 cents represent the losses, energy wasted. Another great contributor to the energy efficiency is the heart exchanger. This tubular heat exchanger has been submitted to hours of testing which proved that its efficiency and endurance is well above the industry standards. Furthermore the heat exchanger’s hot surface igniter and regulator are made of top materials meaning that their endurance shouldn’t be questioned. Additionally the makers of the GDS80804BX Gas Furnace designed it to be more environmentally friendly than its predecessor as it features minimum NOx emissions. Thanks to that this gas furnace can meet the strict California NOx Standards.     

Even though that the GDS80804BX Gas Furnace is designed to operate on gas it can be easily converted to operate on propane. For that to happens is need additional conversion kit which is not included in the basic package.


His warranty is probably the biggest proof of its overall quality as well as every other feature mentioned here. Even though it sounds too good to be truth, but it comes with a decade long warranty. The heat exchanger comes with separate life time limited warranty which adds up to the overall impression that everything on the GDS80804BX Gas Furnace from the Factory Furnace Outlet is of top quality. If in some case somehow the heat exchangers the company is obligated to provide brand new replacement.